How To Install Kitchen Cabinet Pullouts And Precautions
2019-12-31 Tags:
Whether it is easy to install or remove cabinet drawer slides, but the point is essential, you must master the scientific method, and do not use only brute force. Now I will teach you how to install kitchen cabinet pullouts and related removal methods.
Installation method of kitchen cabinet pullouts:
1. Talking about the installation method of the drawer rail, the length of the drawer rail must be the same as the length of the drawer, that is, match. If the lengths match, it is generally shown that the height of the drawer is accurately measured, and then the regular size is drawn on the corresponding wooden board through ink lines.
2. After the first step is ready, it is necessary to install it. According to the several screw holes given by the drawer guide rails, choose the corresponding screws to fix. When fixing the screws, you must fix both sides and the two sides of the drawer. The above must be set. After setting, put the drawer into the guide rail and drag it to test whether it is installed successfully.
How to remove kitchen cabinet pullouts:
1. Drawer guide rail removal is straightforward. Simple computer desks and bedside drawer guides are all three-track rolling type. After disassembling the drawer, we use a small screwdriver to rotate the entrance. The screws stapled on the wooden board can be removed in half smoothly;
2. During the process of disassembling the drawer rails, the drawer should be pulled out horizontally to see if there are any black, sharp, gel-like strips inside. Use the pliers to clamp it outwards gently, and then use a screwdriver to pull the inside out. The customized screws are pried down, and the entire drawer rail is removed:
3. If the drawer rail is a two-section guide roller type, the method of disassembly is similar to that of the three-section drawer guide. As long as the drawer is opened smoothly, slowly find the fixed screws, and use a screwdriver (the size of the screwdriver depends on the screw cap) (Determined by the size), remove them one by one, and shake them by hand to altogether remove them.
Also, about kitchen cabinet pullouts budget, the most important and most worthy of the six parts are hinges, drawer slides, baskets, sinks, handles, drawer partitions, the following small life to take you to see the specific reasons in detail.
1. The hinge
Cabinet hinges are divided into ordinary hinges and damped hinges. A damped hinge is only 15-20 yuan more expensive than a standard strap, but a damped one will make the wardrobe and hooks have a longer service life. So this is the first place on the cabinet that should be willing to spend money.
If you want to save money: two hinges for a cabinet door can be equipped with a damping hinge. The effect is the same.
2. Cabinet pull basket
The difference in the price of the cabinet pull basket is too severe. From 100-5000, the main difference is the material. Generally, we have to choose a stainless steel basket. The price is around 400.
3. The sink
The sink is made of many ceramics, stainless steel, stone, etc. The prices also vary widely, and the highest comprehensive performance-price ratio is stainless steel.
If the budget is sufficient, a single large tank and under-counter basin are recommended for easy cleaning and maintenance in the future.
4. Handle
Although the handle has little effect on the use, it has a significant impact on the overall aesthetics, ranging from 5 to 50 yuan. You can adjust this part of the budget accordingly to make the whole look a lot better.
5. Drawer slide
The drawer slide is directly related to the load of the cabinet drawer. The general price of the slide is about 150. Don't buy a cheap slide at an affordable price. In the end, the load is not enough. There is a change in the back.